unisonic technologies co., ltd sb1060 preliminary diode www.unisonic.com.tw 1 of 3 copyright ? 2014 unisonic technologies co., ltd qw-r202-009.a 10a schottky barrier rectifier ? description the utc sb1060 is a schottky rectifier with high current capacity and low forward voltage. the utc sb1060 is suitable for polarity protection ,low voltage and high frequency inverters and free wheeling applications. ? features * guard ring transient protection * high surge current capability * high current capability * low forward voltage * for use in low voltage,high frequency inverters ? symbol ? ordering information ordering number package pin assignment packing lead free halogen free 1 2 3 sb1060l-ta3-t SB1060G-TA3-T to-220 a k a tube sb1060l-tf1-t sb1060g-tf1-t to-220f1 a k a tube note: pin assignment: a: anode k: cathode ? marking
sb1060 preliminary diode unisonic technologies co., ltd 2 of 3 www.unisonic.com.tw qw-r202-009.a ? absolute maximum ratings (t a =25 c unless otherwise specified.) parameter symbol ratings unit working peak reverse voltage v rwm 60 v repetitive peak reverse voltage v rrm 60 v rms reverse voltage v r ( rms ) 42 v dc blocking voltage v r 60 v average rectified output current i o 10 v non-repetitive peak forwar d surge current 8.3 ms single half-sine-wave i fsm 150 a operating temperature t j -65~+150 c storage temperature t stg -65~+150 c notes: 1. absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. 2. these ratings are limiting values above which t he serviceability of any semiconductor device may be impaired. ? thermal data parameter symbol ratings unit junction to ambient ja 60 c/w junction to case jc 3.0 c/w ? electrical characteristics (t a =25c unless otherwise specified.) parameter symbol test conditions min typ max unit reverse breakdown voltage (note 1) v ( br ) r i r =0.50ma 60 v forward voltage drop v fm i f =10a, t j =25c 0.75 v i f =10a, t j =100c 0.70 v leakage current (note 1) i rm v r =60v, t j =25c 200 a v r =60v, t j =100c 50 ma notes: 1. short duration pulse test used to minimize self-heating effect. 2. thermal resistance junction to case mounted on heatsink.
sb1060 preliminary diode unisonic technologies co., ltd 3 of 3 www.unisonic.com.tw qw-r202-009.a utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
